Light blue PVC panels with fine ribbed texture. Self-releasing surface, no oil needed. Reusable 80+ times — cut your beam forming cost by more than half.
The fine ribbed texture is molded directly into the PVC — not printed, not coated. It creates a controlled micro-profile that breaks the bond between concrete and formwork surface.
Material Close-Up
Hold a Novex PVC panel in your hand and you'll immediately sense the quality difference. The ribbed surface isn't just aesthetic — it's the engineering core of our self-releasing technology. Each ridge is precisely calibrated to minimize concrete adhesion while leaving a smooth finish on the cast beam.
Product Overview
Our light blue PVC panels come in long strips, rectangular sheets, and custom-cut profiles — all with the same ribbed texture and self-releasing surface that makes plastic PVC beam formwork the smartest alternative to timber and steel.
Stacked and ready to ship — each bundle contains panels of identical thickness, verified before palletizing.
From narrow beam strips to full-width sheets — every dimension cut to your specification.
Tight joint lines, zero gap — beam surfaces come out fair-faced without plastering.
Indoor storage preserves flatness — no warping, no moisture uptake, always ready for dispatch.
One person, one panel — no crane needed. The weight advantage cuts your labor cost from day one.
For standard rectangular beams from 200×200mm to 500×800mm. Ribbed inner surface for concrete adhesion control.
Rectangular PVC sheets for beam sides and bottom. Cut to any length on site with standard saw — no special tools needed.
T-beams, inverted beams, edge beams — send us your drawings and we'll produce exact profiles for your project.
Production Process
Every panel goes through extrusion, calibration, cooling, cutting, and inspection — all under one roof. No outsourcing, no middlemen, no quality guesswork.
Virgin PVC compound is heated, extruded through a precision die, and passed through calibration rollers that lock in the ribbed texture and exact thickness — down to ±0.2mm tolerance.
Automated saws cut continuous panels to your exact length — from 500mm to 3,000mm. Clean edges, no chipping, no secondary trimming needed on site.
Every panel passes under visual and dimensional inspection before moving to the packing line. Surface defects, thickness deviation, or edge damage — caught and removed before it leaves the floor.
Post-extrusion, panels are laid flat on vacuum tables to ensure zero warpage before cutting. Beam formwork must be ruler-straight — and it is.
Inspected panels are stacked on treated wooden pallets, wrapped in protective film, and steel-banded — container-ready from the factory floor to your destination port.
Raw Material Standards
We don't buy recycled PVC scrap and hope for the best. Our compound is formulated from virgin PVC resin with precisely measured UV stabilizers, impact modifiers, and processing aids. The result: panels that don't become brittle after one summer on an open site, and don't discolor after months of concrete contact.
Behind every light blue PVC panel is a controlled material supply chain — from compound formulation to finished product, nothing left to chance.
Factory & Quality Control
Our production line runs strict dimensional checks on every batch of plastic PVC beam formwork. Thickness tolerance within ±0.2mm. Each panel is digitally measured before packing to ensure consistency across your entire order.
Technical Specifications
Our plastic PVC beam formwork is extruded from virgin PVC compound with UV stabilizers and impact modifiers. The light blue color is not a coating — it's integrated into the material, so it won't fade or chip even after years of sun and rain exposure on open job sites.
Plastic PVC vs Timber vs Steel
Timber warps after a few pours. Steel dents and rusts. Our plastic PVC beam formwork holds its shape for 80–100 cycles — no swelling, no delamination, no dimensional drift.
The fine ribbed PVC surface doesn't bond with concrete. Strip the formwork clean every single time — no oil, no spray, no labor cost for applying and cleaning release agent.
At roughly 1/5 the weight of steel, two workers handle beam panels without a crane. Cut to length on site with a standard handsaw — no welding, no special equipment.
Water absorption below 0.05%. No rot, no mold, no expansion in rain or high humidity. The light blue color won't fade — it's not a coating, it's the material itself.
"We switched our entire beam formwork to Novex PVC panels on a 15-tower residential project. The light blue panels are easy to identify on site, the ribbed surface strips clean every time, and we eliminated all release agent costs. Paid for itself in under 3 months."
Get a Quote
Tell us your beam cross-section dimensions, quantity, and destination port. We'll reply within 2 hours with unit pricing and freight cost.